600
An operation is pending.
This error should not occur under normal circumstances. Restart your computer
to
make sure that all recent configuration changes have taken effect.
601
The port handle is invalid.
This error should not occur under normal circumstances. Restart your computer
to
make sure that all recent configuration changes have taken effect.
602
The port is already open.
Another application is using the port. Close the application and redial.
603
Caller's buffer is too small.
This error should not occur under normal circumstances. Restart your computer
to
make sure that all recent configuration changes have taken effect.
604
Wrong information specified.
The Remote Access Phone Book file and the current Remote Access configuration
are probably inconsistent. If you have changed your communications equipment
(such as your serial port or modem), be sure to reconfigure Remote Access.
605
Cannot set port information.
The Remote Access Phone Book file and the current Remote Access configuration
are probably inconsistent. If you have changed your communications equipment
(such as your serial port or modem), be sure to reconfigure Remote Access.
606
The port is not connected.
This error should not occur under normal circumstances. Restart your computer
to
make sure that all recent configuration changes have taken effect.
607
The event is invalid.
This error should not occur under normal circumstances. Restart your computer
to
make sure that all recent configuration changes have taken effect.
608
The device does not exist.
The Remote Access Phone Book file and the current Remote Access configuration
are probably inconsistent. If you have changed your communications equipment
(such as your serial port or modem), be sure to reconfigure Remote Access.
609
The device type does not exist.
The Remote Access Phone Book file and the current Remote Access configuration
are probably inconsistent. If you have changed your communications equipment
(such as your serial port or modem), be sure to reconfigure Remote Access.
610
The buffer is invalid.
This error should not occur under normal circumstances. Restart your computer
to
make sure that all recent configuration changes have taken effect.
611
The route is not available.
Most likely, your network configuration is wrong. Restart your computer
to make
sure that all recent configuration changes have taken effect.
612
The route is not allocated.
Most likely, your network configuration is wrong. Restart your computer
to make
sure that all recent configuration changes have taken effect. I
613
Invalid compression specified.
This error should not occur under normal circumstances. Restart your computer
to
make sure that all recent configuration changes have taken effect.
614
Out of buffers.
This error should not occur under normal circumstances. Restart your computer
to
make sure that all recent configuration changes have taken effect.
615
The port was not found.
The Remote Access Phone Book file and the current Remote Access configuration
are probably inconsistent. If you have changed your communications equipment
(such as your serial port or modem), be sure to reconfigure Remote Access.
616
An asynchronous request is pending.
This error should not occur under normal circumstances. Restart your computer
to
make sure that all recent configuration changes have taken effect.
617
The port or device is already disconnecting.
Wait for Remote Access to finish disconnecting the entry or close the Remote
Access Service.
618
The port is not open.
This error should not occur under normal circumstances. Restart your computer
to
make sure that all recent configuration changes have taken effect.
619
The port is disconnected.
This error should not occur under normal circumstances. Restart your computer
to
make sure that all recent configuration changes have taken effect.
620
There are no endpoints.
Most likely, your network configuration is wrong. Restart your computer
to make
sure that all recent configuration changes have taken effect.
621
Cannot open the phone book file.
The Remote Access Service uses the RASPHONE.PBK file in the
\SYSTEM32\RAS subdirectory of your Windows NT directory. Make sure the
file is
on this path, and restart Remote Access.
622
Cannot load the phone book file.
The Remote Access Service uses the RASPHONE.PBK file in the
\SYSTEM32\RAS subdirectory of your Windows NT directory. Make sure the
file is
on this path, and restart Remote Access.
623
Cannot find the phone book entry.
Remote Access has located the Phone Book but cannot find the specified
entry.
This error should not occur unless you are writing to Remote Access APIs,
and
have specified an incorrect entry name.
624
Cannot write the phone book file.
The Remote Access Service uses the RASPHONE.PBK file in the
\SYSTEM32\RAS subdirectory of your Windows NT directory. Make sure your
disk
is not full and that you have write access to this file.
625
Invalid information found in the phone book.
The Remote Access Service uses the file RASPHONE.PBK, located in the
\SYSTEM32\RAS subdirectory of your Windows NT directory. Delete this file,
and
restart Remote Access.
626
Cannot load a string.
This error should not occur under normal circumstances. Restart your computer
to
make sure that all recent configuration changes have taken effect.
627
Cannot find key.
One of the Remote Access configuration files probably contains invalid
information.
The easiest way to resolve this problem is to reinstall Remote Access.
If you are using a modem that is not supported by Remote Access, switch
to a supported
modem, or see Overview of Modem Script File for information about modifying
the modem
script file for your modem.
628
The port was disconnected.
Redial the entry. If you continue to get this message, reduce the modem's
initial
speed, and turn off the advanced modem features.
629
The port was disconnected by the remote machine.
The link has been disconnected for one of the following reasons:
An unrecoverable phone line error.
A noisy line.
Disconnection by the system administrator.
A conflict in configuration parameters between the client and the remote
computer.
To re-establish the link, verify that the authentication, encryption, and
DNS
parameters defined in the Dial-Up Networking phonebook entry match those
that
are configured on the remote computer. If the remote computer cannot authenticate
the client, the connection will be terminated. Also, try lowering your
modem speed.
You can enable automatic redialing through the User Preferences Dialing
tab.
630
The port was disconnected due to hardware failure.
The link has been disconnected for one of the following reasons:
An unrecoverable error occurred in your modem (or other communication
device).
An unrecoverable error occurred on your communications port.
Your modem cable has come unplugged.
Possible actions to diagnose and correct the problem:
Make sure your modem is on and your cable is securely attached.
Make sure your modem is functioning properly.
631
The port was disconnected by the user.
You have disconnected the line through an action on your computer. Redial.
632
The structure size is incorrect.
This error should not occur under normal circumstances. Restart your computer
to
make sure that all recent configuration changes have taken effect.
633
The port is already in use or is not configured for Remote Access dialout.
If the port is already in use by another connection, hang up the connection
on this
port, or edit the entry to use another communication port.
If the port is not already in use, reconfigure your Remote Access port
for dial out. Ensure
that the adapter/modem has been installed and the port has been added using
the Control
Panel Network option.
634
Cannot register your computer on the remote network.
The Remote Access server was unable to register your computer's name on
the
network.
635
Unknown error.
This error should not occur under normal circumstances. Restart your computer
to
make sure that all recent configuration changes have taken effect.
636
The wrong device is attached to the port.
Your hardware configuration and the Remote Access setup are probably
inconsistent with each other. If you have changed your communications equipment
(such as serial port or modem), be sure to reconfigure Remote Access accordingly.
637
The string could not be converted.
This error should not occur under normal circumstances. Restart your computer
to
make sure that all recent configuration changes have taken effect.
638
The request has timed out.
This error should not occur under normal circumstances. Restart your computer
to
make sure that all recent configuration changes have taken effect.
639
No asynchronous net available.
Most likely, your network configuration is wrong. Restart your computer
to make
sure that all recent configuration changes have taken effect.
640
A NetBIOS error has occurred.
Your modem may not have negotiated the connection correctly, or the line
may be
noisy. Set the modem to a lower initial speed (bps), and dial again.
641
The server cannot allocate NetBIOS resources needed to support the client.
Ask your system administrator to increase the resource capacity of the
Remote
Access server, or through the Services Control Panel stop nonessential
services on
your computer, such as messaging and network DDE.
642
One of your NetBIOS names is already registered on the remote network.
Networking architecture requires each computer on the network to be registered
with a unique name. This rule applies to both the LAN and remote workstations.
643
A network adapter at the server failed.
644
You will not receive network message popups.
Another computer already connected to the network is using your messaging
name. Messages addressed to you will be sent to that computer. If you want
to
receive messages at your remote workstation, you must remember to log off
your
office computer before you next dial in to the network.
Note: This error does not affect messaging through Microsoft Mail.
645
Internal authentication error.
This error should not occur under normal circumstances. Restart your computer
to
make sure that all recent configuration changes have taken effect.
646
The account is not permitted to log on at this time of day.
Your account has been configured for limited access to the network.
647
The account is disabled.
648
The password has expired.
If you are connecting through the Remote Access Phone Book, you will
automatically be prompted to change your password.
649
The account does not have Remote Access permission.
You have a valid account on the domain you selected, but your account does
not
have permission to access the network remotely. Ask your system administrator
to
give you dial-in permission.
If you have an account with dial-in permission on another domain, do the
following to use
your account on that domain:
1.Edit the Phone Book entry and clear the Authenticate using current user
name and password check box.
2.Dial.
3.Specify the appropriate user name, password, and domain.
650
The Remote Access server is not responding.
One of the following may have caused this error:
The line may be too noisy. Lower the modem's initial speed (bps), and dial
again. See Setting Modem Features.
Your modem may have failed to negotiate correctly with the Remote Access
server's modem at the selected speed. Lower the modem's initial speed
(bps), and dial again.
651
Your modem (or other connecting device) has reported an error.
Your modem (or other connecting device) has reported an error. If you are
using a
supported modem, turn the modem off and then back on. Close and restart
the
Remote Access Service, and then redial.
Make sure you have correctly configured your modem for Remote Access.
652
Unrecognized response from the device.
Your modem (or other connecting device) has returned a message that is
not listed
in one or more of your Remote Access script files (PAD.INF, MODEM.INF,
or
SWITCH.INF).
If you are connecting through a supported modem, turn the modem off and
back on. Then redial. If the problem persists, try connecting at a lower
initial
speed.
If you are connecting through an unsupported modem, make sure that the
indicated response is included in the appropriate script file.
653
A macro required by the device was not found in the device .INF file
section.
One of the Remote Access configuration files probably contains invalid
information.
The easiest way to resolve this problem is to reinstall Remote Access.
654
A command or response in the device .INF file section refers to an
undefined macro
One of the Remote Access configuration files probably contains invalid
information.
The easiest way to resolve this problem is to reinstall Remote Access.
655
The <message> macro was not found in the device .INF file section.
One of the Remote Access configuration files probably contains invalid
information.
The easiest way to resolve this problem is to reinstall Remote Access.
656
The <defaultoff> macro in the device .INF file section contains an undefined
macro
One of the Remote Access configuration files probably contains invalid
information.
The easiest way to resolve this problem is to reinstall Remote Access.
657
The device .INF file could not be opened.
One of the Remote Access configuration files probably contains invalid
information.
The easiest way to resolve this problem is to reinstall Remote Access.
658
The device name in the device .INF or media .INI file is too long.
One of the Remote Access configuration files probably contains invalid
information.
The easiest way to resolve this problem is to reinstall Remote Access.
659
The media .INI file refers to an unknown device name.
One of the Remote Access configuration files probably contains invalid
information.
The easiest way to resolve this problem is to reinstall Remote Access.
660
The device .INF file contains no responses for the command.
One of the Remote Access configuration files probably contains invalid
information.
The easiest way to resolve this problem is to reinstall Remote Access.
661
The device .INF file is missing a command.
One of the Remote Access configuration files probably contains invalid
information.
The easiest way to resolve this problem is to reinstall Remote Access.
662
Attempted to set a macro not listed in device .INF file section.
One of the Remote Access configuration files probably contains invalid
information.
The easiest way to resolve this problem is to reinstall Remote Access.
663
The media .INI file refers to an unknown device type.
One of the Remote Access configuration files probably contains invalid
information.
The easiest way to resolve this problem is to reinstall Remote Access.
664
Cannot allocate memory.
The system has run out of memory. Close some applications, and redial.
665
The port is not configured for Remote Access.
If the port is already being used for another connection, hang up that
connection, or
edit this entry to use another communications port.
If the port is not already in use, reconfigure your Remote Access port
for dialing out.
666
Your modem (or other connecting device) is not functioning.
Your modem (or other connecting device) is not responding for one of the
following
reasons:
The modem has been turned off.
The modem is not securely connected to your computer. Make sure your
cable is securely fastened to both the modem and the computer.
The modem has experienced a hardware glitch. Turn off the modem, wait for
20 seconds, and then restart the modem.
667
Cannot read the media .INI file.
One of the Remote Access configuration files probably contains invalid
information.
The easiest way to resolve this problem is to reinstall Remote Access.
668
The connection dropped.
Redial the entry. If you continue to get this message, reduce the modem's
initial
speed, and turn off the advanced modem features.
669
The usage parameter in the media .INI file is invalid.
One of the Remote Access configuration files probably contains invalid
information.
The easiest way to resolve this problem is to reinstall Remote Access.
670
Cannot read the section name from the media .INI file.
One of the Remote Access configuration files probably contains invalid
information.
The easiest way to resolve this problem is to reinstall Remote Access.
671
Cannot read the device type from the media .INI file.
One of the Remote Access configuration files probably contains invalid
information.
The easiest way to resolve this problem is to reinstall Remote Access.
672
Cannot read the device name from the media .INI file.
One of the Remote Access configuration files probably contains invalid
information.
The easiest way to resolve this problem is to reinstall Remote Access.
673
Cannot read the usage from the media .INI file.
One of the Remote Access configuration files probably contains invalid
information.
The easiest way to resolve this problem is to reinstall Remote Access.
674
Cannot read the maximum connection BPS rate from the media .INI file.
One of the Remote Access configuration files probably contains invalid
information.
The easiest way to resolve this problem is to reinstall Remote Access.
675
Cannot read the maximum carrier BPS rate from the media .INI file.
One of the Remote Access configuration files probably contains invalid
information.
The easiest way to resolve this problem is to reinstall Remote Access.
676
The line is busy.
Redial the number. Automate redialing through the User Preferences Dialing
tab.
677
A person answered instead of a modem.
A modem did not pick up the phone. Please check the number and dial again.
678
There is no answer.
A modem did not pick up the phone. Please check the number and dial again.
679
Cannot detect carrier.
A modem did not pick up the phone. Please check the number and dial again.
Automate redialing through the User Preferences Dialing tab.
Note: Many modems return this error if the remote modem does not pick up
the phone.
680
There is no dial tone.
Make sure the phone line is plugged into the correct socket in the modem.
Also,
make sure you've added any special access numbers, such as the prefix 9
followed
by a comma, to connect to an outside line. For example: 9,555-8181
681
General error reported by device.
One of the Remote Access configuration files probably contains invalid
information.
The easiest way to resolve this problem is to reinstall Remote Access.
682
ERROR WRITING SECTIONNAME
This error should not occur under normal circumstances. Restart your computer
to
make sure that all recent configuration changes have taken effect.
683
ERROR WRITING DEVICETYPE
This error should not occur under normal circumstances. Restart your computer
to
make sure that all recent configuration changes have taken effect.
684
ERROR WRITING DEVICENAME
This error should not occur under normal circumstances. Restart your computer
to
make sure that all recent configuration changes have taken effect.
685
ERROR WRITING MAXCONNECTBPS
This error should not occur under normal circumstances. Restart your computer
to
make sure that all recent configuration changes have taken effect.
686
ERROR WRITING MAXCARRIERBPS
This error should not occur under normal circumstances. Restart your computer
to
make sure that all recent configuration changes have taken effect.
687
ERROR WRITING USAGE
This error should not occur under normal circumstances. Restart your computer
to
make sure that all recent configuration changes have taken effect.
688
ERROR WRITING DEFAULTOFF
This error should not occur under normal circumstances. Restart your computer
to
make sure that all recent configuration changes have taken effect.
689
ERROR READING DEFAULTOFF
This error should not occur under normal circumstances. Restart your computer
to
make sure that all recent configuration changes have taken effect.
690
ERROR EMPTY INI FILE
This error should not occur under normal circumstances. Restart your computer
to
make sure that all recent configuration changes have taken effect.
691
Access denied because username and/or password is invalid on the
domain.
Type your user name, password, and domain. If you are unsure of this information,
ask your system administrator.
If you do not specify a domain, the Remote Access server attempts to verify
your user
name and password on the domain of which it is a member.
692
Hardware failure in port or attached device.
Your modem (or other connecting device) is not responding for one of the
following
reasons:
The modem has been turned off.
The modem is not securely connected to your computer. Make sure your
cable is securely fastened to both the modem and the computer.
The serial cable does not have the correct specifications required by Remote
Access.
The modem has experienced a hardware glitch. Turn off the modem, wait for
20 seconds, and then restart it.
693
ERROR NOT BINARY MACRO
One of the Remote Access configuration files probably contains invalid
information.
The easiest way to resolve this problem is to reinstall Remote Access.
694
ERROR DCB NOT FOUND
This error should not occur under normal circumstances. Restart your computer
to
make sure that all recent configuration changes have taken effect.
695
ERROR STATE MACHINES NOT STARTED
This error should not occur under normal circumstances. Restart your computer
to
make sure that all recent configuration changes have taken effect.
696
ERROR STATE MACHINES ALREADY STARTED
This error should not occur under normal circumstances. Restart your computer
to
make sure that all recent configuration changes have taken effect.
697
ERROR PARTIAL RESPONSE LOOPING
This error should not occur under normal circumstances. Restart your computer
to
make sure that all recent configuration changes have taken effect.
698
A response keyname in the device .INF file is not in the expected format.
One of the Remote Access configuration files probably contains invalid
information.
The easiest way to resolve this problem is to reinstall Remote Access.
699
The device response caused buffer overflow.
This error should not occur under normal circumstances. Restart your computer
to
make sure that all recent configuration changes have taken effect.
700
The expanded command in the device .INF file is too long.
The limit for commands in the script file is 256 characters.
701
The device moved to a BPS rate not supported by the COM driver.
Your modem tried to connect at a speed that the serial port cannot interpret.
Reset
your initial speed to the next lowest standard bps rate: 38400, 19200,
9600, 2400.
702
Device response received when none expected.
One of the Remote Access configuration files probably contains invalid
information.
The easiest way to resolve this problem is to reinstall Remote Access.
703
ERROR INTERACTIVE MODE
You can connect to entries that require Terminal mode only through the
Remote
Access Phone Book. This feature is not supported by RASDIAL or the Remote
Access APIs.
704
ERROR BAD CALLBACK NUMBER
This error should not occur under normal circumstances. Restart your computer
to
make sure that all recent configuration changes have taken effect.
705
ERROR INVALID AUTH STATE
This error should not occur under normal circumstances. Restart your computer
to
make sure that all recent configuration changes have taken effect.
706
ERROR WRITING INITBPS
This error should not occur under normal circumstances. Restart your computer
to
make sure that all recent configuration changes have taken effect.
707
X.25 diagnostic indication.
Your X.25 connection has returned an error.
708
The account has expired.
709
Error changing password on domain.
Try changing your password again.
710
Serial overrun errors were detected while communicating with your
modem.
Lower the modem's initial speed (bits per second), and redial.
711
RasMan initialization failure. Check the event log.
This error should not occur under normal circumstances. Restart your computer
to
make sure that all recent configuration changes have taken effect.
712
Biplex port is initializing. Wait a few seconds and redial.
This error should not occur under normal circumstances. Restart your computer
to
make sure that all recent configuration changes have taken effect.
713
No active ISDN lines are available.
Make sure that your ISDN line is plugged in correctly, make sure that the
terminating resistors are installed correctly (see the documentation for
your ISDN
card), and then redial. If you still get this error, contact your ISDN
card vendor
Customer Service or your ISDN telephone company.
714
Not enough ISDN channels are available to make the call.
All of the available ISDN channels are busy. Hang up one call and redial.
715
Too many errors occurred because of poor phone line quality.
Too many asynchronous errors occurred on your phone line during authentication.
Try again. If the problem persists, lower your baud rate and disable any
modem
features that may be set.
716
The Remote Access IP configuration is unusable.
This error indicates a problem with the Remote Access TCP/IP configuration.
User
should reboot to ensure all configuration changes have taken effect.
717
No IP addresses are available in the static pool of Remote Access IP
addresses.
Try a specific IP address that will not cause a conflict on the remote
network.
718
PPP timeout.
A PPP conversation was started, but was terminated because the remote
computer did not respond within an appropriate time. This can be caused
by poor
line quality or by a problem at the server.
719
PPP terminated by remote machine.
A PPP conversation was started, but was terminated at the request of the
remote
machine. Most likely an error occurred on the server.
720
No PPP control protocols configured.
Either there are no PPP network control protocols configured for the entry
or the
corresponding network protocol is not installed. This error may occur when
the type
of network protocols is changed during the product upgrade process. Correct
the
entry by checking the desired protocols in the PPP section of the Network
Protocol
Settings phonebook entry dialog box.
721
Remote PPP peer is not responding.
PPP was attempted but the remote computers did not respond. This error
occurs
when the server does not support PPP, such as a down-level Remote Access
server or a SLIP server.
722
The PPP packet is invalid.
A PPP packet was received that was not in a valid format.
723
The phone number, including prefix and suffix, is too long.
The maximum length of the phone number, including prefix and suffix, is
128
characters.
724
The IPX protocol cannot dial-out on the port because the computer is an
IPX router.
This is a beta limitation that will be removed for final release.
725
The IPX protocol cannot dial-in on the port because the IPX router is not
installed..
This indicates an inconsistency in the Remote Access IPX configuration.
Reboot to
ensure all configuration changes have taken effect.
726
The IPX protocol cannot be used for dial-out on more than one port at a
time..
Only one port can be used to dial out using the IPX protocol.
727
Cannot access TCPCFG.DLL.
The TCPCFG.DLL is a required TCP/IP component. Ensure TCP/IP is installed
correctly.
728
Cannot find an IP adapter bound to Remote Access.
This error indicates a problem with the Remote Access TCP/IP configuration.
Reboot to ensure all configuration changes have taken effect.
729
SLIP cannot be used unless the IP protocol is installed.
Install TCP/IP using Control Panel.
730
Computer registration is not complete.
A request for information on the status of computer registration was made
before
the information was available.
731
The protocol is not configured.
Specific information was requested on a PPP control protocol that is not
configured.
732
The PPP negotiation is not converging.
The negotiation of PPP parameters did not succeed because the local and
remote
computers could not agree on a common set of parameters.
733
The PPP control protocol for this network protocol is not available on
the
server.
The server supports PPP but does not support the client network protocol.
734
The PPP link control protocol terminated..
A PPP link control protocol conversation was started, but was terminated
at the
request of the remote computer. Most likely an error occurred on the server.
735
The requested address was rejected by the server..
The client is configured to request a specific IP address. The server is
not
configured to permit clients requesting specific IP addresses or the specific
IP
address may already be in use by another client.
736
The remote computer terminated the control protocol.
A PPP network control protocol conversation was started, but was terminated
at
the request of the remote computer. Most likely an error occurred on the
server.
737
Loopback detected..
The local and remote computers involved in the PPP conversation are the
same
computer. This usually means a device (for example, a modem) on the link
is
echoing characters back. Try resetting these devices.
738
The server did not assign an address.
The server was unable to assign an IP address to the client from the pool
of
addresses allocated.
739
The remote server cannot use the Windows NT encrypted password.
This error will occur only when making a PPP connection to non-Microsoft
Windows NT servers.
740
The TAPI devices configured for Remote Access failed to initialize or were
not installed correctly.
The TAPI devices configured for Remote Access failed to initialize or were
not
installed correctly.
741
The local computer does not support encryption.
The Require Data Encryption check box is selected but the RAS driver does
not
have encryption capability. Clear the check box to use unencrypted connections.
742
The remote server does not support encryption.
The Require Data Encryption check box is selected but the RAS server does
not
support data encryption. Clear the check box to use unencrypted connections
or
contact your system administrator.
743
The remote server requires encryption.
The remote RAS server requires data encryption check box is selected but
the
local RAS client does not have encryption capability.
744
Cannot use the IPX net number assigned by the remote server. Check the
event log.
The IPX network number assigned to the client by the RAS server for the
WAN
interface is already in use on the client's LAN. Disconnect the client
from the LAN,
wait 3 minutes, and try again.
752
A syntax error was encountered while processing a script.
The dial-up script associated with a phonebook entry contains a syntax
error.
In Dial-Up Networking, edit the phonebook entry. In the Script tab, click